|Alloy Name:||1350 Aluminum Wire|
99.50% pure aluminum, non-heat treatable alloy. 1350 is highly conductive and has good formability often used in electronics and other applications.
|Size/diameter (inches):||0.0310 - 0.2500|
H13 (Strain Hardened to a strength that is roughly 3/8 of the way between annealed and full-hard)
Custom tempers available upon request
|Typical Chemistry:||Si: 0.10 max
Fe: 0.40 max
Cu: 0.05 max
Mn: 0.01 max
Cr: 0.01 max
Zn: 0.05 max
B: 0.05 max
Ga: 0.03 max
V+Ti: 0.02 max
OE: 0.03 max
OT: 0.10 max
Al: 99.50 min
*Typical Chemistry listed above is for reference only and is not to be used for specification purposes.
|Note For Non Stock Items:||
If you need a non-stock item, we custom manufacture wire in most diameters and lengths.
Bob Martin company believes the information contained herein to be reliable. However, the technical information is given without charge by Bob Martin Company and the user shall employ such information at its own discretion and risk. Bob Martin Company assumes no responsibility for results obtained or incurred from the use of such information in whole or in part.