BOB MARTIN COMPANY
2209 North Seaman Ave. El Monte, CA 91733
Phone: 800-821-4291 • Fax: 888-WIREASY
Email: info@bobmartinco.com • Web Address: www.bobmartinco.com
Item # ALLOY 7501,Spring Wire
Nickel alloy, corrosion and heat resistant wire no. 1 temper, precipitation hardenable

Specifications |
Alloy Name | Alloy X750 Wire No. 1 Temper |
Size/Diameter (Inches) | 0.032 in
0.040 in
0.051 in
0.062 in
0.093 in
0.125 in |
Specific Gravity | 8.25 |
Specification | AMS 5698 |
UNS Number | N07750 |
Size/Diameter (Fraction | 1/32 in
1/16 in
3/32 in
1/8 in |
Standard Cut Length | 6 ft
12 ft |
Package Size | |
Typical Analysis | Al - 0.40/1.00%
C - 0.08%
Cb - 0.70/1.20%
Co - 1.00%
Cr - 14.00/17.00%
Cu - 0.50%
Fe - 5.00/9.00%
Mn - 1.00%
Ni - 70.00%
S - 0.01%
Si - 0.50%
Ta - 0.05%
Ti - 2.25/2.75% |
Application | Nickel alloy, corrosion and heat resistant wire no. 1 temper, precipitation hardenable |
Note for Non Stock Items | If you need a non-stock item that you do not see, don't worry. We will fabricate it for you. We make custom wire in all diameters and lengths. All orders can be produced in cut lengths or spooled wire. We can help you with any of the technical questions you may have |
Warranty Clause | Bob Martin company believes the information contained herein to be reliable. However, the technical information is given without charge by Bob Martin Company and the user shall employ such information at its own discretion and risk. Bob Martin Company assumes no responsibility for results obtained or incurred from the use of such information in whole or in part. |
Electrical Resistance | |
Tensile Strength | |