BOB MARTIN COMPANY
2209 North Seaman Ave. El Monte, CA 91733
Phone: 800-821-4291 • Fax: 888-WIREASY
Email: info@bobmartinco.com • Web Address: www.bobmartinco.com
Item # ALLOY 69,Weld Wire
Alloy 69 is used for gas tungsten arc and gas metal arc welding of Alloy 722 and Alloy X750.

Specifications |
Alloy Name | Alloy 69 Weld Wire |
Size/Diameter (Inches) | 0.032 in
0.035 in
0.040 in
0.045 in
0.062 in
0.093 in
0.125 in |
Specific Gravity | 8.25 |
Specification | AMS 5778
AWS A 5.14 ERNiCrFe-8 |
UNS Number | N07750 |
Size/Diameter (Fraction | 1/32 in
3/64 in
1/16 in
3/32 in
1/8 in |
Standard Cut Length | 12 in
24 in
36 in |
Package Size | 1 lb
5 lb
10 lb |
Typical Analysis | Al - 0.40/1.00%
C - 0.08%
Cb - 0.70/1.20%
Co - 1.00%
Cr - 14.00/17.00%
Cu - 0.50%
Fe - 5.00/9.00%
Mn - 1.00%
Ni - 70%
S - 0.01%
Si - 0.50%
Ta - 0.05%
Ti - 2.25/2.75% |
Application | Alloy 69 is used for gas tungsten arc and gas metal arc welding of Alloy 722 and Alloy X750. |
Note for Non Stock Items | If you need a non-stock item that you do not see, don't worry. We will fabricate it for you. We make custom wire in all diameters and lengths. We can help you with any of the technical questions you may have. |
Warranty Clause | Bob Martin company believes the information contained herein to be reliable. However, the technical information is given without charge by Bob Martin Company and the user shall employ such information at its own discretion and risk. Bob Martin Company assumes no responsibility for results obtained or incurred from the use of such information in whole or in part. |