BOB MARTIN COMPANY
2209 North Seaman Ave. El Monte, CA 91733
Phone: 800-821-4291 • Fax: 888-WIREASY
Email: info@bobmartinco.com • Web Address: www.bobmartinco.com
Item # 321,Stainless Wire
Corrosion-resistant steel up to 1500 degrees
Used for: Multipurpose safety wire/lockwire and tie wire. Similar to 302/304 stainless, except higher titanium content. Annealed condition, (not heat treatable) can be work hardened.
| Specifications |
| Alloy Name | 321 Stainless Wire |
| Size/Diameter (Inches) | 0.020 to 0.125 in |
| Specific Gravity | 7.93 |
| Specification | AMS 5689
ASTM A580
QQ-W-423 COND. A |
| UNS Number | S32100 |
| Package Size | 1 lb
5 lb
10 lb |
| Typical Analysis | C - 0.08%
Cr - 17.00/19.00%
Mn - 2.00%
Ni - 9.00/12.00%
P - 0.04%
S - 0.03%
Si - 0.75%
Ti - 0.70% |
| Application | Corrosion-resistant steel up to 1500 degrees
Used for: Multipurpose safety wire/lockwire and tie wire. Similar to 302/304 stainless, except higher titanium content. Annealed condition, (not heat treatable) can be work hardened. |
| Note for Non Stock Items | If you need a non-stock item that you do not see, don't worry. We will fabricate it for you. We make custom wire in all diameters and lengths. We can help you with any of the technical questions you may have. |
| Warranty Clause | Bob Martin company believes the information contained herein to be reliable. However, the technical information is given without charge by Bob Martin Company and the user shall employ such information at its own discretion and risk. Bob Martin Company assumes no responsibility for results obtained or incurred from the use of such information in whole or in part. |
| Electrical Resistance | Low |
| Tensile Strength | 90000 to 120000 psi |