Item # A357.0 ALUM,Weld Wire

A357.2 is produced to give a tensile strength greater than that normally found using alloy A356.

Download

	Footage Calculator
	A357 Aluminum MSDS

Specifications

Alloy Name

A357.2 Aluminum Weld Wire

Size/Diameter (Inches)

0.62 to 0.125 in

Specific Gravity

2.7

Specification

AWS A5.10
CL R-357

UNS Number

A03570

Size/Diameter (Fraction

1/16 to 1/8 in

Standard Cut Length

Package Size

1 lb
5 lb

Typical Analysis

AL - REM
Cu - 0.10%
Fe - 0.12%
Mg - 0.70%
Mn - 0.05%
Si - 7.50%
Ti - 0.20%
Zn - 0.05%

Application

A357.2 is produced to give a tensile strength greater than that normally found using alloy A356.

Note for Non Stock Items

If you need a non-stock item that you do not see, don't worry. We will fabricate it for you. We make custom wire in all diameters and lengths. We can help you with any of the technical questions you may have.

Warranty Clause

Bob Martin company believes the information contained herein to be reliable. However, the technical information is given without charge by Bob Martin Company and the user shall employ such information at its own discretion and risk. Bob Martin Company assumes no responsibility for results obtained or incurred from the use of such information in whole or in part.

Recipient's Email IDs:
Your Email ID:
Your Name:
Comment :

Nationwide service since 1950 | ISO 9001:2008 AS 9100:2009 Certificate

ALLOY WIRE PRODUCTS

Item # A357.0 ALUM,Weld Wire

Specifications

Item # A357.0 ALUM,Weld Wire

BOB MARTIN COMPANY © 2015 All Rights Reserved.

Specifications
Alloy Name	A357.2 Aluminum Weld Wire
Size/Diameter (Inches)	0.62 to 0.125 in
Specific Gravity	2.7
Specification	AWS A5.10 CL R-357
UNS Number	A03570
Size/Diameter (Fraction	1/16 to 1/8 in
Standard Cut Length
Package Size	1 lb 5 lb
Typical Analysis	AL - REM Cu - 0.10% Fe - 0.12% Mg - 0.70% Mn - 0.05% Si - 7.50% Ti - 0.20% Zn - 0.05%
Application	A357.2 is produced to give a tensile strength greater than that normally found using alloy A356.
Note for Non Stock Items	If you need a non-stock item that you do not see, don't worry. We will fabricate it for you. We make custom wire in all diameters and lengths. We can help you with any of the technical questions you may have.
Warranty Clause	Bob Martin company believes the information contained herein to be reliable. However, the technical information is given without charge by Bob Martin Company and the user shall employ such information at its own discretion and risk. Bob Martin Company assumes no responsibility for results obtained or incurred from the use of such information in whole or in part.